HOME > ProductsOthersAbrasion Tester

 Abrasion Tester, Triboster TSa-series

 
Triboster TSa-series are the series of instruments for abrasion/wear tests adopting crank system reciprocating motion. Stand-alone model TSa-100 is available at present and computerized model TSa-300 that measures kinetic friction changes over reciprocating cycles will be launched.
 
 
TSa100clear.jpg
Stand-alone type abrasion/wear tester adopting crank system reciprocating motion and the following performance features: - Can perform abrasion test maximum about one million cycles continuously. The number can be set on the front digital panel. - Moving stroke is adjustable from 5 to 50mm. - Safety cover for automatic shutdown system - Special customization for multiple arms to set contact parts (3 or 5 arms) is possible. It allows reducing time of tests for multiple samples.
 

Major Specification data

square Stage motion:   Crank system reciprocating motion (sinusoidal pattern motion)
square Vertical load:    Standard: 100 – 1,000g (9.8N)  (in step of 50g)
square Travel distance:  5 - 50mm (adjustable with stepless)
square

Travel speed:    One cycle/sec (60 rpm)

square

Travel times:    Max. 999,999 cycles 

square

Sample size:    Not larger than 170(W)×100(D)×30(H)mm

square

Temp. control:   Options (Jacket stage: 10 – 60C, Heater stage: room temp. - 180C)

square

Dimensions:    310(W)×650(D)×390(H)mm

square

Weight:       About 23kg

 
PAGETOP